Ponsse Austria
   Company       Machines       Harvester Heads       Used Machines       Contact     


Harvesterhead H 60, H 60 e

Reliable multi-purpose harvester head

Harvesteraggregat H60 und H60e 

Reliable multi-purpose harvester head
The P0NSSE H60 is a mid-size harvester head for both final cutting and thinning. The H60 is a reliable product, which Ponsse has manufactured since 1987. The H60's ratio of capacity to weight is unbeatable. The harvester head even has a feed force of 24 kN and feed speed of 5 m/s. These features guarantee efficient work even on large 65 cm trunks.In spite of its large capacity, the device is light and narrow and does not unnecessarily damage the remaining trees. The H60 harvester head comes equipped with bogie style roller assemblies that conform to the shape of the tree and can be fitted with either paired rollers or chain tracks. The feed rollers offers an extremely efficient, non-slip grip. The chain tracks offer a wide, secure feed grip that minimises trunk surface damage.


PONSSE H60e
Reliable multi-purpose harvester head
The P0NSSE H60e is a mid-size multi-purpose harvester head for both final cutting and thinning. The H60e is a reliable harvester head based on the conventional H60, which has been manufactured since 1987.  The H60E is an unmatched powerful harvester head in proportion to its weight and size. The harvester head has a feed force of 24 kN and feed speed of 5 m/s. These features guarantee efficient work even on hulking 65 cm trunks.

Dimensions
Weight in working conditions
(incl. rotator and hanger)
depending on equipment:
850-900 kg (1870-2090 lb)
Length: 1, 420 mm (56 in)
Width: 1, 100 mm (43.5 in)
Height without rotator: 1, 400 mm (55 in)
 
Power
Power consumption: 70-90 kW (94-120 hp)
Operating pressure:  20-24 MPa (2900-3480 lb/sq in)
Required oil flow:  240 -300 l/min (64-80 gal/min) 
   
Rotator
  Black Bruin MR10, Black Bruin BBR15 or
Indexator AV12
   
Sawing unit
Hydraulic chain saw   
Engine: F11 - 19 or F12 - 30
Power: 45 kW (60 hp)
Saw blade length H60: 640/750 mm (25/29.5 in)
Saw speed: 44 m/s (144 ft/s)
Chain pitch:  0.404 "  
Cutting diameter,
one pass:
520/640 mm (20/25 in)
Chain shot quard standard
   
Feed unit
Feed system: bogie roller assemblies with spike rollers or
chain tracks
Gross feed force: 24 kN (5400 lb)
Feed speed: 0-5 m/s (0-17 ft/s) 
Two stage grip pressure:

Optional equipment
standard in the H60e model

Delimbing
H60: 2-4 hydraulically movable knives,
one stationary  
H60e: 3-5 hydraulically movable knives,
one stationary
Largest opening: 600 mm (23.5 in)
  Separately controlled delimbing knives
and feed rollers
   
Measuring- and control automation
  PONSSE Opti 4G
   
 Optional Equipment
 

Automatic PONSSE chain tensioner,
also includes a manual chain tensioning
screw 

Colour marking (hydraulic) 

Stump handling (hydraulic) 

Floating tilt: As a standard the tilt works with
on/off - controls so that when the tilt is down,
the cylinder presses the harvester head down continuously. With a floating tilt the harvester
head can be set to swing freely when in the
down position. 

OptiOil (electronically-controlled chain
lubrication system, controls in the Opti4G system) 

Optional knives (2 movable knives)